Polycarboxylate Superplasticizer Powder Concrete Superplasticizer
|Min. Order:||1 Ton|
|Packaging:||PE film inside/plastic woven bag/craft paper bag or customized by customer requirement|
|Supply Ability:||300000 Metric Ton/Metric Tons per Year|
is a new generation of high-purity environmentally friendly Concrete Admixture with
the world's advanced level. The polymer copolymer made of a variety of high
molecular organic compounds through molecular design grafting, embedding and
polymerization, and then adopting thermal synthesis process, it is powdered by
removing solvent liquid nitrogen protection drying technology.
has reached the international advanced level in terms of technical performance
indicators and cost performance. ZF-602 PCE powder polycarboxylic acid series
comprehensive water reducing agent has unique technical performance advantages:
(1) Moderate dosage, obvious dispersion effect, excellent cost performance;
(2) High water reduction rate and small slump loss;
(3) Good adaptability to cement mixtures, excellent concrete workability;
(4) The prepared concrete has a small shrinkage rate, which is beneficial to improve
the volume stability and durability of concrete;
(5) It has good compatibility and adaptability with other admixtures to be used in
cement-based and gypsum-based dry powder materials;
(6) The preparation and use process does not pollute the environment. It belongs to
the green environmental protection admixture product.
bag; customized packaging can be provided.
the stacking height. The shelf life of this product is 12 months. If it exceeds 6 months,
it needs to be re-inspected and confirmed for use.
sand rate through experiments to reach the required water-reducing agent content in
terms of slump, strength and setting conditions.
2) Suitable for high-performance concrete, high-strength concrete, and high-flow
concrete. When used for concrete higher than C50, the raw materials should be
selected according to relevant technical specifications, the appropriate mixing process
should be determined, and a certain amount of experimental data should be obtained.
To make the produced concrete flow properties meet the construction requirements,
the concrete strength should have a certain surplus coefficient.
3) This product can be mixed into concrete at the same time as mixing water, and the
effect of mixing with water into concrete is better.