Water Purifier for Textile Effluent
Water Purifier for Textile Effluent
Payment Type: | L/C, T/T, Western Union |
---|
Productivity: | 30000/Year |
---|---|
Place of Origin: | China |
Supply Ability: | 30000/Year |
Basic Info
Model No.: BWD-01
Product Description
Model NO.: BWD-01 Type: Dicyandiamide Cationic Resin Polymer Trademark: bluwat Origin: China CAS: 55295-98-2 Usuage: Water Purifier for Textile Effluent Specification: SGS ISO HS Code: 38249022 Our BWD-01 Water Decoloring Agent is mainly used for water purifer for textile effluent, dyestuff printing and washing wastewater.
Specification:
Appearance: Transparent sticky liquid
Viscosity: 50 - 250mPa. S (20º C)
Solid content: 50% MIN
PH 30% solution: 3 - 5
Specific gravity: 1.2 - 1.3 (25º C)
Advantage:
1, Biggest manufacturer and supplier of decoloring polymers in the world
2, More than 10 yeasrs experience in production and 15 years experience in water treatment
3, Professional technical service team(8 engineers) to help you
4, Have reserved sample more than 1 year for quality tracking
5, Automatic control during the production, keep quality good and stable.
6, General chemical, harmless, no-flammable and non-explosive
Application range:
A) Textile effluent
B) Dyeing&Washing wastewater
C) Paper making wastewater
D) Chemical wastewater
E) Other wastewater
Usage:
A) Dilutes with 10 - 40 times water and then dosed into the waste water directly
B) PH index of the waste water should be adjusted to 7 - 10 for better result
C) If colority and COD are relatively high, it can be used with the help of Polyaluminum chloride to reduce treatment cost, whether polyaluminum chloride is used before or afterwards depends on the flocculation test and the treatment process
Storage:
Can be stored at room temperature, within a temperature range of 10 - 30º C
Packing:
30kg/pail, 250kg/plastic drum and 1250kg IBC tank.
Jar test process for BWD-01Water Decoloring Agent:
1. Make solution of BWD-01, mix with 40 times water to have 2.5% solution for use.
2. Make PAC solution, 1-3% Al2O3
3. Have solution of anionic Polyelectrolyte, 0.1%.
4. Have effluent, test pH value, adjust pH value to 8-9. (It is very important, higher or lower PH, BWD-01 works not well)
5. Add PAC solution, mix with effluent completely. About 1-3 minutes
6. Add BWD-01 solution, mix with effluent completely, about 5-10 minutes
7. Add small content of anionic polyelectrolyte solution, mix slowly to have big floc.
8. Sedimentation
9. Check color for treated effluent
10. Adjust dosage of BWD-01 and PAC to do more test to have better testing result
Bluwat Chemicals is a professional supplier of Water Treatment Chemicals in China. Our core products are coagulants and flocculants for the treatment of water.
We are exporting our chemicals to more than 53 countries in the world. We do OEM for Nalco, Kemira, SNF and BASF for years, we hope you are the next.
Contact us if you need more details on Water Purifier. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Purifier、Water Purifier for Textile Effluent. If these products fail to match your need, please contact us and we would like to provide relevant information.
Specification:
Appearance: Transparent sticky liquid
Viscosity: 50 - 250mPa. S (20º C)
Solid content: 50% MIN
PH 30% solution: 3 - 5
Specific gravity: 1.2 - 1.3 (25º C)
Advantage:
1, Biggest manufacturer and supplier of decoloring polymers in the world
2, More than 10 yeasrs experience in production and 15 years experience in water treatment
3, Professional technical service team(8 engineers) to help you
4, Have reserved sample more than 1 year for quality tracking
5, Automatic control during the production, keep quality good and stable.
6, General chemical, harmless, no-flammable and non-explosive
Application range:
A) Textile effluent
B) Dyeing&Washing wastewater
C) Paper making wastewater
D) Chemical wastewater
E) Other wastewater
Usage:
A) Dilutes with 10 - 40 times water and then dosed into the waste water directly
B) PH index of the waste water should be adjusted to 7 - 10 for better result
C) If colority and COD are relatively high, it can be used with the help of Polyaluminum chloride to reduce treatment cost, whether polyaluminum chloride is used before or afterwards depends on the flocculation test and the treatment process
Storage:
Can be stored at room temperature, within a temperature range of 10 - 30º C
Packing:
30kg/pail, 250kg/plastic drum and 1250kg IBC tank.
Jar test process for BWD-01Water Decoloring Agent:
1. Make solution of BWD-01, mix with 40 times water to have 2.5% solution for use.
2. Make PAC solution, 1-3% Al2O3
3. Have solution of anionic Polyelectrolyte, 0.1%.
4. Have effluent, test pH value, adjust pH value to 8-9. (It is very important, higher or lower PH, BWD-01 works not well)
5. Add PAC solution, mix with effluent completely. About 1-3 minutes
6. Add BWD-01 solution, mix with effluent completely, about 5-10 minutes
7. Add small content of anionic polyelectrolyte solution, mix slowly to have big floc.
8. Sedimentation
9. Check color for treated effluent
10. Adjust dosage of BWD-01 and PAC to do more test to have better testing result
Bluwat Chemicals is a professional supplier of Water Treatment Chemicals in China. Our core products are coagulants and flocculants for the treatment of water.
We are exporting our chemicals to more than 53 countries in the world. We do OEM for Nalco, Kemira, SNF and BASF for years, we hope you are the next.
Contact us if you need more details on Water Purifier. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Purifier、Water Purifier for Textile Effluent. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Water Decoloring Agent
Premium Related Products
Other Products
Hot Products
White Polyaluminium Chloride for Potable Water TreatmentPolyacrylamide Flocculantfor Municipal Waste Water TreatmentDust Control Chemical Powder Calcium LignosulphonateWhite Crystalline Powder Sodium GluconateConcrete Admixture and Coal Water Slurry Additive with Na LlignosulphonateGluconate-98% of Water Quality StabilizerFlotation Agent Lignosulphonic Acid Sodium SaltSodium/Calicum Lignin Sulfonic Acid as Fertilizer AdditivesEuropen Popular Leather Additives Calcium LignosulphonateCoal Briquette Binder Powder of Sodium LignosulphonateCAS: 527-07-1 Sodium Gluconate as Dispering Agent in Concrete AdmixtureShale Control Additives (SAS) of Oil Well AdditivesConstruction Chemicals Sodium Lingnosulfonate for Dust Suppression (MN)Ceramic Additives Sodium Lignosulphonate Jinan YuanshengSNFCustomized Fertilizer Auxiliary Sodium Lignosulfonate (MN)