Color Removal Chemical for Dyeing Waste Water Treatment
|Payment Type:||L/C, T/T, Western Union|
|Productivity:||5000 Mt / Month|
|Place of Origin:||Jiangsu, China|
|Supply Ability:||5000 Mt / Month|
Model No.: BWD-01
CAS No.: 55295-98-2
Product Name: BWD-01 Water Decoloring Agent polymer
Chemical Name: Dicyandiamide formaldehyde resin
This product is a quaternary cationic polymer which is specialized product to treat effluent for color removal, flocculating and COD decreasing.
1, It is mainly used for color removal treatment for high-colority wastewater from dyestuffs plants. It is suitable to treat wastewater with actived, acidic and disperse dyestuffs.
2, It can also be used to treat wastewater from textile industry and dye houses, pigment industry, printing ink industry and paper industry.
3, It also can be used in the production process of paper&plup as rtention agent.
1, Appearance: Light-color, sticky liquid
2, Viscosity: 50 - 250mPa. S (20º C)
3, Solid content: >50%
4, pH 30% solution: 3 - 5
5, Specific gravity: 1.2 - 1.3 (25º C)
1, Dilutes with 10 - 40 times water and then dosed into the waste water Directly, after being mixed for several minutes, it can be precipitated or Air-floated to become clear water
2, pH index of the waste water should be adjusted to 7 - 10 for better Result
3 If colority and COD are relatively high, it can be used with the help of Polyaluminum chloride to reduce treatment cost, whether polyaluminum Chloride is used before or afterwards depends on the flocculation test And the treatment process
Package and Storage:
1, It is harmless, non dangerous material
2, It can be stored at room temperature, can not be placed in the Sun
3, 25kg pails, 250kg plastic drums and 1250kg IBC tank.
|Appearance||colorless or light-color sticky liquid|
|Dynamic viscosity (cps,20°C)||50-250 M PA. S (20 degree celsius )|
|pH (30% water solution)||1.0~3.0||3.0~5.0|
|Solid content %||≥50||≥50 |
Product Categories : Water Decoloring Agent
Premium Related Products