Dyeing Wastewater Water Decoloring Agent for Color Removal

Model NO.: BWD-01 Active Content: 50% Model: Bwd-01 Application: Dyeing Wastewater Treatment Specification: SGS ISO HS Code: 38099010 Apperance: Transparent Liquid Trade Mark: Bluwat Capacity: 3000 Tons Per Month Trademark: BLUWAT Origin: Jiangsu, China BWD-01 Water Decoloring Agent is mainly used  for Dyeing Waste Water for color removal.

Description: Dicyandiamide Formaldehyde Flocculant is liquid type cationic copolymer with 50%min solid content, can be used for decoloring-clarification of sewage and colored waste water from factories including textile dyeing, dye-works and paper mill. Dicyandiamide formaldehyde flocculant can offer further flocculating effect, if jointly used with the inorganic flocculating agents including aluminum sulfate, poly-aluminum chloride and ferric chloride, or the polymer group such as polyacrylamide and acryiic polymer. Being a positively charged cationic flocculating agent, BWD-01 neutralizes the negatively charged pollutants in the waste water to form insoluble complexes in water.  It is specially working high performance with the dyeing wastewater containing the hydrophilic dyes (reactive dyes, acid dyes, disperse dyes etc.), less dosage, the color clear, fast speed, high processing liquid clarification of the settlement, but also reduce the composition of COD, improve the COD removal rate. The experimental results indicate that the dicyandiamide formaldehyde resin not only on hydrophobic dispersed dye color removal effect is excellent and of hydrophilic dye (reactive dyes, acid dyes) in addition to the effect of color is also very good, the dyeing wastewater showed that, less dosage, in addition to the obvious, settling velocity and the processing liquid high clarity, while also reducing COD components, improve the removal rate of COD, COD removal rate can reach to more than 98%.  
Specifications:

Product Name:	Dicyandiamide Formaldehyde Flocculant (BWD-01 Water Decoloringi Agent)
Cas No	55295-98-2
Appearance:	Aqueous Solution of Liquid and Colorless
Solid Content:	≥50%
Specific Gravity :	Not less than 1.20 g/ml (at 25C)
PH Value:	3-6 (@30% Solution)
Viscosity:	50-300cps (@25°C)
Package:	30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum

 
Application Fields: Color removal and COD reduction for wastewater from textile dyeing & printing mills, dyestuffs & pigment mills, ink & paper making mills, color removal treatment. High efficient for treating textile wastewater with different dyes, especially the water soluble dyes as Reactive dye, Acid dye, Disperse dye, Direct dye, Sulphur dye, Vat dye etc.. In paper & pulp making industry, it can be used as retention agent in the production process.  
 
Competitive Advantage:

1	Dicyandiamide formaldehyde flocculant (BWD-01 Water Decoloring Agent) has strong decreasing of COD and decolorization
2	Has functions of de-color high-colority effluent from textile and dyestuffs mills.
3	High performance to treat wastewater with soluble and insoluble dyestuffs, such as Reactive, Acid, Disperse, Direct Dyestuff etc..
4	Specially used to treat color wastewater from textile and dyeing industry, pigment industry, printing ink industry and paper industry.
5	Fast sedimentation, better flocculation.
6	Less sludge produced than other inorganic coagulants.
7	Soluble in water, safe, non-toxic, hydrolytic stability, is not sensitive to the change of pH value, anti-chlorine. Harmless, no-flammable and non-explosive, it can be stored at room temperature, it cannot be placed in the sun.

 
Application Methods:

1	Mix flocculant completely with water 40-50 times, get the solution of 2-2.5%, dose it directly in the sewage, with a glass rod to stir a few minutes after sedimentation or flotation can cause the effluent decolorization obtained after the clear liquid.
2	Adjust the effluent sample pH value to 8-10, that can better improve the decolorization effect of dicyandiamide formaldehyde resin.
3	When dyeing and other need to deal with the high chroma of wastewater, COD can and of polymer aluminum chloride (PAC) with the use, but attention not mixed use. This can effectively reduce the waste water decolorization processing cost, how to add PAC should be according to the actual situation, it is best to make the professional and technical personnel to develop a good solution.
4	Add small content of anionic polyelectrolyte solution, mix slowly to have big floc, Sedimentation.

 
 
Package and Storage: It is harmless, no-flammable and non-explosive, it can be stored at room temperature, it can not be placed in the sun. It is packaged in plastic drums with each containing 30kg, 50kgs, 250kg, 1250kg , or others according to the requirements of clients. The product would show slightly stratification or appear white at low temperature. There is no negative impact on the performance after mixing up.
 
Application Case:
A. When have biological treatment first and after they make chemical treatment.
    In this case they use:
    50-80 ppm BWD-01/03(raw)
    15-20ppm Polyaluminum Chloride(solid)
    1 - 2 ppm Anionic polyacrylamide(solid)
 
    First we apply the PAC (contact time 3-5 min with the waste water), after then BWD-01 Water Decoloring Agent (contact time 5-10 min), and after then anionic polyacrylamide.
    It will give too much economy if we'll adjust the pH 7-8, otherwise the consumption of BWD-01 will be ~20% higher.
 
B. When the treat first by chemicals, then the usual dosages are :
    Adjustment the pH 7-8
    80-100 ppm BWD-01/03(raw)
    15 -30 ppm PAC(solid)
    1 - 2 ppm Anionic polyacrylamide(solid)

Contact us if you need more details on Dyeing. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Dyeing Wastewater、Dyeing Wastewater Color Removal. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Water Decoloring Agent