Bwf160 Organosilicon Defoamer for Waste Water Treatment
Bwf160 Organosilicon Defoamer for Waste Water Treatment
Payment Type: | L/C, T/T, Western Union |
---|
Productivity: | 20 Thousand Tons/Year |
---|---|
Place of Origin: | Jiangsu |
Supply Ability: | 20 Thousand Tons/Year |
Basic Info
Model No.: BWF-160
Product Description
Model NO.: BWF-160 CAS: 63148-53-8 Origin: Jiangsu Apperance: Milky Liquid Trademark: bluwat Trade name: BWF 160 DEFOAMER
Chemical Type: An emulsion of Dimethyl Polysiloxane (Silicon Type)
IONIC CHARGE: Nonic/Anionic
CAS: 63148-53-8
Physical Specification
1. Apperance: White emulsion (Water base).
2. Water Miscibility: Forms a good dispersion.
3. Fluidity: Viscosity not great than 1000 cPs @20oC DIN 53019 100rpm.
4. Cleanliness: No particles after screening through a 400 micron aperture screen.
5. Emulsion particles size: 90% less than 100 microns.
6. Water content: Not greater than 85%
Purpose:
BWF160 is an foam control agent for use in a wide range of aqueous industrial systems, particularly in textile processing and other surfactant systems.
Application:
Normally used as delivered. Where very small quantities are to be added, it can be pre-diluted with soft or distilled water. The level of addition recommended is normally between 10 - 100 ppm and should be optimized by trial.
Storage:
Store in closed containers. Avoid extremes of low temperature.
Stability:
6 months minimum
Packing:
200 litre or 1000 litre plastic drums Contact us if you need more details on Defoamer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Organosilicon Defoamer、Flocculants. If these products fail to match your need, please contact us and we would like to provide relevant information.
Chemical Type: An emulsion of Dimethyl Polysiloxane (Silicon Type)
IONIC CHARGE: Nonic/Anionic
CAS: 63148-53-8
Physical Specification
1. Apperance: White emulsion (Water base).
2. Water Miscibility: Forms a good dispersion.
3. Fluidity: Viscosity not great than 1000 cPs @20oC DIN 53019 100rpm.
4. Cleanliness: No particles after screening through a 400 micron aperture screen.
5. Emulsion particles size: 90% less than 100 microns.
6. Water content: Not greater than 85%
Purpose:
BWF160 is an foam control agent for use in a wide range of aqueous industrial systems, particularly in textile processing and other surfactant systems.
Application:
Normally used as delivered. Where very small quantities are to be added, it can be pre-diluted with soft or distilled water. The level of addition recommended is normally between 10 - 100 ppm and should be optimized by trial.
Storage:
Store in closed containers. Avoid extremes of low temperature.
Stability:
6 months minimum
Packing:
200 litre or 1000 litre plastic drums Contact us if you need more details on Defoamer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Organosilicon Defoamer、Flocculants. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Water Treatment Chemicals
Premium Related Products
Other Products
Hot Products
White Polyaluminium Chloride for Potable Water TreatmentPolyacrylamide Flocculantfor Municipal Waste Water TreatmentDust Control Chemical Powder Calcium LignosulphonateWhite Crystalline Powder Sodium GluconateConcrete Admixture and Coal Water Slurry Additive with Na LlignosulphonateGluconate-98% of Water Quality StabilizerFlotation Agent Lignosulphonic Acid Sodium SaltSodium/Calicum Lignin Sulfonic Acid as Fertilizer AdditivesEuropen Popular Leather Additives Calcium LignosulphonateCoal Briquette Binder Powder of Sodium LignosulphonateCAS: 527-07-1 Sodium Gluconate as Dispering Agent in Concrete AdmixtureShale Control Additives (SAS) of Oil Well AdditivesConstruction Chemicals Sodium Lingnosulfonate for Dust Suppression (MN)Ceramic Additives Sodium Lignosulphonate Jinan YuanshengSNFCustomized Fertilizer Auxiliary Sodium Lignosulfonate (MN)