Non-Ionic Polyacrylamide/Polyelectrolyte PAM
Non-Ionic Polyacrylamide/Polyelectrolyte PAM
Payment Type: | L/C, T/T |
---|
Productivity: | 20000mt/Year |
---|---|
Place of Origin: | China |
Supply Ability: | 20000mt/Year |
Basic Info
Model No.: N-PAM
Product Description
Model NO.: N-PAM Trademark: bluwat CAS: 9003-05-8 Origin: China Our Non-Ionic Polyacrylamide is used for water treatment and mining industries.
Features:
1) Appearance: White granule
2) Molecular weight: 5 - 8 million
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Dissolving time: 2 hours maximum (10° C)
6) Insoluble: 0.5% maximum
7) Monomer free: 0.05% maximum
Advantages:
Economical to use- Effective at very low dosage levels, resulting in reduced handling and storage cost.
Works over a wide pH range and does not alter pH in the system.
Larger, faster-settling flocs are formed in gravity settling operations.
Increased filtration rates and drier cakes are produced in filtration processes. Sludges contain less ash when incinerated.
Higher solids capture, increased clarity, and greater throughput are attained in centrifugation.
Air flotation operations produce clearer underflows and grater throughput.
Pricipal uses:
Municipal and industrial water treatment
Clarification industrial raw waters, often in conjunction with in organics such as Alum
Alum sludge dewatering.
Preparation for Application:
Any grade of Nonionic flocculant should be dissolved in water under low agitation to make 0.01% to 0.05 % solution. Dissolution should be complete after 60 minutes, but will be faster in warm water. However avoid temperature above 500° C. Stock solutions are stable for at least two weeks. For best results further dilution with clean water should be made prior to being fed to process stream. Avoid turbulent mixing conditions in the process stream after any grade of above product has been added.
Treatment Levels:
For use as:
Flocculant: O. 2 ~ 2.0 ppm.
Coagulant aid: O. 5 ~ 1.0 ppm.
Filtration aid: O. 01 ~1.0 ppm.
Sludge dewatering: O. 05 ~O. 2 % Dry solid
Handling:
Spilled polymer is very slippery. Spills should be scooped and / or wiped prier to flushing with water. Being highly hygroscopic avoid from exposure to air.
Please Note the information presented here is based on best of our present knowledge. However should not be considered as guarantee of any specific property or product as a whole.
Packing:
25kg/plastic enhanced paper bags with inner plastic bag, 25kg/PE bag
Contact us if you need more details on Polyacrylamide/Polyelectrolyte. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Polyelectrolyte/Pam、Pam. If these products fail to match your need, please contact us and we would like to provide relevant information.
Features:
1) Appearance: White granule
2) Molecular weight: 5 - 8 million
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Dissolving time: 2 hours maximum (10° C)
6) Insoluble: 0.5% maximum
7) Monomer free: 0.05% maximum
Advantages:
Economical to use- Effective at very low dosage levels, resulting in reduced handling and storage cost.
Works over a wide pH range and does not alter pH in the system.
Larger, faster-settling flocs are formed in gravity settling operations.
Increased filtration rates and drier cakes are produced in filtration processes. Sludges contain less ash when incinerated.
Higher solids capture, increased clarity, and greater throughput are attained in centrifugation.
Air flotation operations produce clearer underflows and grater throughput.
Pricipal uses:
Municipal and industrial water treatment
Clarification industrial raw waters, often in conjunction with in organics such as Alum
Alum sludge dewatering.
Preparation for Application:
Any grade of Nonionic flocculant should be dissolved in water under low agitation to make 0.01% to 0.05 % solution. Dissolution should be complete after 60 minutes, but will be faster in warm water. However avoid temperature above 500° C. Stock solutions are stable for at least two weeks. For best results further dilution with clean water should be made prior to being fed to process stream. Avoid turbulent mixing conditions in the process stream after any grade of above product has been added.
Treatment Levels:
For use as:
Flocculant: O. 2 ~ 2.0 ppm.
Coagulant aid: O. 5 ~ 1.0 ppm.
Filtration aid: O. 01 ~1.0 ppm.
Sludge dewatering: O. 05 ~O. 2 % Dry solid
Handling:
Spilled polymer is very slippery. Spills should be scooped and / or wiped prier to flushing with water. Being highly hygroscopic avoid from exposure to air.
Please Note the information presented here is based on best of our present knowledge. However should not be considered as guarantee of any specific property or product as a whole.
Packing:
25kg/plastic enhanced paper bags with inner plastic bag, 25kg/PE bag
Contact us if you need more details on Polyacrylamide/Polyelectrolyte. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Polyelectrolyte/Pam、Pam. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Polyacrylamide Flocculant
Premium Related Products
Other Products
Hot Products
White Polyaluminium Chloride for Potable Water TreatmentPolyacrylamide Flocculantfor Municipal Waste Water TreatmentDust Control Chemical Powder Calcium LignosulphonateWhite Crystalline Powder Sodium GluconateConcrete Admixture and Coal Water Slurry Additive with Na LlignosulphonateGluconate-98% of Water Quality StabilizerFlotation Agent Lignosulphonic Acid Sodium SaltSodium/Calicum Lignin Sulfonic Acid as Fertilizer AdditivesEuropen Popular Leather Additives Calcium LignosulphonateCoal Briquette Binder Powder of Sodium LignosulphonateCAS: 527-07-1 Sodium Gluconate as Dispering Agent in Concrete AdmixtureShale Control Additives (SAS) of Oil Well AdditivesConstruction Chemicals Sodium Lingnosulfonate for Dust Suppression (MN)Ceramic Additives Sodium Lignosulphonate Jinan YuanshengSNFCustomized Fertilizer Auxiliary Sodium Lignosulfonate (MN)